Agriculture: Tomato Pest Management Guidelines

Whiteflies

  • Bandedwinged whitefly: Trialeurodes abutilonia
  • Greenhouse whitefly: Trialeurodes vaporariorum
  • Sweetpotato whitefly: Bemisia tabaci biotype B
  • Description of the Pest

    Several species of whiteflies may infest tomato. Proper identification of sweetpotato whiteflies and greenhouse whiteflies is important because other whitefly species do not cause economic damage in tomato. Use a hand lens to examine both immatures and adults. Whitefly adults are tiny (0.06 inch, 1.5 mm long), yellowish insects with white wings. Sweetpotato whiteflies hold their wings somewhat vertically tilted, or rooflike, over the body; the wings do not meet over the back but have a small space separating them. Greenhouse whitefly adults are very similar in appearance to the sweetpotato whitefly but hold their wings flatter over the back and there is no space between the wings where they meet in the center of the back. Bandedwinged whiteflies, Trialeurodes abutilonia, have grayish or brownish bands across their wings.

    Whiteflies are found mostly on the undersides of leaves. They fly readily when plants are disturbed. The tiny, elongated eggs hatch into a first instar nymphal stage that has legs and antennae and is mobile; first instar nymphs are commonly referred to as "crawlers". Both legs and antennae are lost after the first molt and subsequent nymphal instars remain fixed to the leaf surface and have a scalelike appearance. The last nymphal instar, often called the pupa or the red-eyed nymph, is the easiest to identify. Sweetpotato whitefly pupae are oval, whitish, and soft. The edge of the pupa tapers down to the leaf surface and has few to no long waxy filaments around the edge. In contrast, greenhouse whitefly pupae have many long waxy filament around the edge and the edge is somewhat vertical where it contacts the leaf surface.

    Currently sweetpotato whitefly is only a problem of tomatoes grown in southern California and areas of the southern and central San Joaquin Valley. Greenhouse whiteflies are found in all but the lower desert growing areas.

    Damage

    Both species of whitefly cause damage to leaves by feeding, which causes leaves to yellow and curl, and by the production of honeydew, which causes leaves to appear shiny or blackened (from sooty mold growing on the honeydew). Feeding by sweetpotato whitefly is especially damaging because it also causes fruit to ripen unevenly.

    In recent years, the greenhouse whitefly has been found to be the vector of tomato infectious chlorosis virus, a virus capable of causing heavy losses in the production of fresh-market and greenhouse tomatoes.

    Bemisia species of whiteflies transmit gemini viruses such as that cause TOMATO YELLOW LEAF CURL, which has recently been found in the Imperial Valley and Coachella Valley. The spread of this virus in the state is a major threat to tomato production. To prevent the spread of Tomato yellow leaf curl virus into other areas of California, do not bring transplants into California from out-of-state or move transplants or other Bemisia-infested hosts from an area that is known to be infested with the disease to uninfested areas. Use only virus-free tomato transplants grown and shipped from the Imperial Valley, which are monitored by CDFA and the county agricultural commissioner's office.

    Management

    An integrated pest management program for whiteflies includes following good cultural practices, such as host-free periods, conserving natural enemies, routinely monitoring fields for trouble spots, and using pesticides only when necessary.

    Biological Control

    Several wasps, including species in the Encarsia and Eretmocerus genera, parasitize whiteflies. Whitefly nymphs are also preyed upon by bigeyed bugs, lacewing larvae, and lady beetle larvae. Sweetpotato whitefly is an introduced pest that has escaped its natural enemies. Some indigenous native parasites and predators do attack it, but do not keep it below damaging numbers. The parasitic wasp, Encarsia formosa, has been used successfully to control greenhouse whitefly in greenhouses or protected crop situations elsewhere in the world where tomatoes are more commonly grown in this manner.

    Cultural Control

    The best control for whiteflies is to maximize the distance and time interval between host crops.

    • When possible, plant tomatoes at least one-half mile upwind from key sweetpotato whitefly hosts such as melons, cole crops, and cotton.
    • Maintain good sanitation in areas of winter and spring host crops and weeds by destroying and removing all crop residues as soon as possible. Control weeds in noncrop areas including head rows (headland areas) and fallow fields.
    • Harvest alfalfa on as short a schedule as possible.
    • Allow the maximum time between harvest and subsequent planting of sweetpotato whitefly host crops.
    • Grow vegetables and melons in the shortest time-span possible.

    Adult sweetpotato whiteflies are repelled by silver- or aluminum-colored mulches. Place reflective polyethylene mulches on planting beds before seeding or transplanting to significantly reduce rate of colonization by whiteflies and delay the buildup of damaging numbers of whiteflies by 4 to 6 weeks. This delay in infestation can be especially important if virus transmission is a major concern. The mulches lose their effectiveness when more than 60% of the surface is covered by foliage. Therefore, they are effective only for the first few weeks after seedling emergence or transplanting of either spring or fall tomatoes.

    Greenhouse whiteflies are often induced by applications of broad-spectrum pesticides. Avoid such materials early in the season.

    Organically Acceptable Methods

    Cultural and biological control as well as sprays of insecticidal soaps and oil plus azadirachtin are acceptable for use on organically certified produce.

    Monitoring and Treatment Decisions

    Routinely check field margins for whiteflies; these areas are usually infested first. Be especially alert for the rapid migration of whiteflies when nearby host crops are in decline. During these critical periods, check fields twice weekly. Yellow sticky traps may be useful in detecting initial whitefly migrations into fields.

    Allow beneficials an opportunity to control light whitefly infestations. If higher populations are present at the field margins than the field centers, then treat only the field margins. This approach will reduce treatment costs and help preserve beneficials in the field. The treatment threshold for sweetpotato whitefly is about 4 adults per leaf in a random 30-leaf sample of healthy leaves. Thresholds have not yet been established for greenhouse whitefly.

    Common name Amount per acre** REI‡ PHI‡
    (Example trade name) (hours) (days)
    Not all registered pesticides are listed. The following are ranked with the pesticides having the greatest IPM value listed first—the most effective and least harmful to natural enemies, honey bees, and the environment are at the top of the table. When choosing a pesticide, consider information relating to air and water quality, resistance management, and the pesticide's properties and application timing. Always read the label of the product being used.
     
    AT PLANTING OR TRANSPLANTING
     
    A. IMIDACLOPRID
      (Admire Pro) 7–10.5 fl oz 12 21
      MODE-OF-ACTION GROUP NUMBER1: 4A
      COMMENTS: Effective against all whitefly species, but it is suggested here to target sweetpotato whitefly. Do not apply to vegetables grown for seed. Soil applied or through drip at transplant.

    Review and follow the California neonicotinoid regulations effective January 1, 2024. Permissible application rates of this insecticide may be lower than label rates if applying more than one neonicotinoid active ingredients or using more than one application method in the same season.
     
    B. DINOTEFURAN
      (Venom) 5–6 oz 12 21
      MODE-OF-ACTION GROUP NUMBER1: 4A
      COMMENTS: Soil application. Not for use on varieties with fruit less than 2 inches (e.g., cherry or grape tomatoes) or for use on vegetables grown for seed.

    Review and follow the California neonicotinoid regulations effective January 1, 2024. Permissible application rates of this insecticide may be lower than label rates if applying more than one neonicotinoid active ingredients or using more than one application method in the same season.
     
    C. ACETAMIPRID
      (Assail) 0.6–1.7 fl oz 12 7
      MODE-OF-ACTION GROUP NUMBER1: 4A
     
    DURING GROWING SEASON
     
    A. SPIROTETRAMAT
      (Movento) 4–5 fl oz 24 1
      MODE-OF-ACTION GROUP NUMBER1: 23
     
    B. SPIROMESIFEN
      (Oberon 2SC) 7–8.5 fl oz 12 1
      MODE-OF-ACTION GROUP NUMBER1: 23
      COMMENTS: Apply early to help prevent virus transmission if that is a concern.
     
    C. BUPROFEZIN
      (Courier SC) 9–13.6 fl oz 12 1
      MODE-OF-ACTION GROUP NUMBER1: 16
      COMMENTS: An insect growth regulator.
     
    D. PYRIPROXYFEN
      (Knack) 8–10 fl oz 12 14
      MODE-OF-ACTION GROUP NUMBER1: 7C
      COMMENTS: An insect growth regulator. Effective against immature whiteflies only. Repeated tank mixes of this product with orthene may cause leafminer outbreaks.
     
    E. BIFENTHRIN*
      (Capture 2EC-CAL) 2.1–5.2 oz 12 1
      MODE-OF-ACTION GROUP NUMBER1: 3A
     
    F. FENPROPATHRIN*
      (Danitol 2.4EC) 7–10.66 fl oz 24 3
      MODE-OF-ACTION GROUP NUMBER1: 3A
      . . . PLUS . . .
      MALATHION 8
        1.5 pt 12 1
      MODE-OF-ACTION GROUP NUMBER1: 1B
      COMMENTS: Do not use a Group number 3 insecticide if leafminers are present because it is destructive of their parasites. For tank mixes, observe all directions for use on all labels, and employ the most restrictive limits and precautions. Never exceed the maximum a.i. on any label when tank mixing products that contain the same a.i. Do not spray directly or allow to drift onto blooming crops or weeds where bees are foraging.
     
    G. INSECTICIDAL SOAP#
      (M-Pede) Label rates 12 0
      MODE OF ACTION: A contact insecticide with smothering and barrier effects.
      COMMENTS: Thorough coverage, including lower sides of leaves, is essential for good control. Ground applications provide better coverage than aerial ones. Using hollow-cone nozzles or air-assist sprayers improves canopy penetration. Additional treatments may be necessary.
     
    H. ROSEMARY OIL/PEPPERMINT OIL#
      (Ecotrol EC) 3 pt 0 0
      MODE OF ACTION: Contact including smothering and barrier effects.
      . . . PLUS . . .
      AZADIRACHTIN#
      (Neemix 4.5) 7 oz 4 0
      MODE-OF-ACTION GROUP NUMBER1: un
      COMMENTS: Thorough coverage, including lower sides of leaves, is essential for good control. Ground applications provide better coverage than aerial ones. Using hollow-cone nozzles or air-assist sprayers improves canopy penetration. Additional treatments may be necessary. For tank mixes, observe all directions for use on all labels, and employ the most restrictive limits and precautions. Never exceed the maximum a.i. on any label when tank-mixing products that contain the same a.i. Do not use if sulfur was applied recently or will be in the near future.
     
    I. OXAMYL*
      (Vydate L) 2–4 pt 48 3
      MODE-OF-ACTION GROUP NUMBER1: 1A
      COMMENTS: Apply in sufficient water to obtain uniform coverage of foliage. Use low rate for light infestations and high rate for severe infestations. This insecticide works best in combination with endosulfan for the control of whiteflies.
    ** See label for dilution rates.
    Restricted entry interval (REI) is the number of hours (unless otherwise noted) from treatment until the treated area can be safely entered without protective clothing. Preharvest interval (PHI) is the number of days from treatment until harvest can take place. In some cases the REI exceeds the PHI. The longer of these two intervals is the minimum time that must elapse before harvest may take place.
    * Permit required from county agricultural commissioner for purchase or use.
    # Acceptable for use on organically grown produce.
    1 Rotate chemicals with a different mode-of-action group number, and do not use products with the same mode-of-action group number more than twice per season to help prevent the development of resistance. For example, the organophosphates have a group number of 1B; chemicals with a 1B group number should be alternated with chemicals that have a group number other than 1B. Mode-of-action group numbers ("un"=unknown or uncertain mode of action) are assigned by IRAC (Insecticide Resistance Action Committee).

    Important Links

    Text Updated: 12/13
    Treatment Table Updated: 12/13
    Feedback