Description of the Pest
Obliquebanded leafroller overwinters as third-instar larvae under bud scales. The overwintered larvae pupate in spring, and the first generation of adults emerges in late April or May. Larvae are yellowish green with brown to black heads. Adults are reddish brown moths with dark brown bands on the wings. There are usually two generations a year in the Sacramento Valley and up to three in the San Joaquin Valley.
Damage
Infestations of obliquebanded leafroller can occasionally reach damaging levels in peaches. Larvae feed on flower parts and on fruit early in the season, causing deep depressions that eventually become rough and russeted by harvest; damage may be mistaken for that caused by western flower thrips. Because of the high cyanide content of peach leaves, larvae generally concentrate their feeding on fruit; consequently, lower numbers of larvae may cause more damage in peaches than in other crops. This leafroller is more damaging than fruittree leafrollers because it has one to two summer generations.
Management
Delayed dormant treatments and bloom time applications for other pests help keep leafroller populations under control. However, regular monitoring each season is important so that prompt action can be taken if damaging populations develop. Throughout the season, watch for the presence of leafrollers while monitoring for other pests. This is especially important in orchards where bloom time sprays and pheromone confusion are used to control peach twig borer and oriental fruit moth.
Biological Control
A number of parasites, including species of Macrocentrus, Cotesia (=Apanteles), and Exochus, attack leafroller larvae. General predators such as lacewings, assassin bugs, and minute pirate bugs may feed on eggs and larvae. Preservation of natural enemy populations is an important part of keeping leafroller numbers low. Use selective materials that are least disruptive of biological control when treating other pests.
Organically Acceptable Methods
Organically acceptable management tools include biological control and sprays of Bacillus thuringiensis, the Entrust formulation of spinosad, and certain narrow range oils.
Monitoring and Treatment Decisions
Check the orchard in early spring (March–April) for the presence of larvae and feeding damage on flowers (see EARLY SEASON MONITORING). If damaging populations are observed, a number of environmentally friendly insecticides are effective in controlling this pest, including Bacillus thuringiensis, spinetoram (Delegate), spinosad (Entrust, Success), and methoxyfenozide (Intrepid). The best timing for control of overwintering larvae is at full bloom or early petal fall.
Pheromone traps placed in the orchard in mid-April (see PHEROMONE TRAPS) will help to monitor the population levels of this insect and provide information for management of the summer generations. Based on research done in California pistachio orchards, begin accumulating degree-days as soon as traps begin to catch moths using a lower threshold of 43°F and an upper threshold of 94°F. Make treatments between 600 and 1000 DD.
Calculate degree-days for obliquebanded leafroller in peaches for your location using the obliquebanded leafroller pest model or degree-day table. To learn more about using degree-days to time insecticide applications, watch the degree-days video.
Examine fruit on trees every week after color break (see PREHARVEST FRUIT SAMPLES) to detect any developing problems in the orchard, and take a fruit damage sample at harvest to assess the effectiveness of the current year's IPM program and to determine the needs of next year's program (see FRUIT EVALUATION AT HARVEST). Record results for harvest sample.
| Common name | Amount per acre** | REI‡ | PHI‡ | ||
|---|---|---|---|---|---|
| (Example trade name) | (conc.) | (dilute) | (hours) | (days) | |
| Not all registered pesticides are listed. The following are ranked with the pesticides having the greatest IPM value listed first—the most effective and least harmful to natural enemies, honey bees, and the environment are at the top of the table. When choosing a pesticide, consider information relating to air and water quality, resistance management, and the pesticide's properties and application timing. Always read the label of the product being used. | |||||
| DELAYED-DORMANT | |||||
| A. | NARROW RANGE OIL | ||||
| (IVC 440 Supreme)# | 5–7 gal | 1–2 gal | 12 | 0 | |
| MODE OFACTION: Contact including smothering and barrier effects. | |||||
| COMMENTS: Choose a narrow range oil with a 50% distillation point of 440 or higher for dormant season use. Always check with your certifier as to which oils are organically acceptable. | |||||
| . . . PLUS . . . | |||||
| SPINOSAD | |||||
| (Entrust)# | 1.25–2.5 oz | 0.42–0.83 oz | 4 | 1 | |
| (Success) | 4–8 fl oz | 1.3–2.7 fl oz | 4 | 1 | |
| MODE-OF-ACTION GROUP NUMBER1: 5 | |||||
| COMMENTS: Toxic to bees; do not spray directly or allow to drift onto blooming crops or weeds where bees are foraging. | |||||
| . . . or . . . | |||||
| SPINETORAM | |||||
| (Delegate WG) | 4.5–7 oz | 4 | 1 | ||
| MODE-OF-ACTION GROUP NUMBER1: 5 | |||||
| COMMENTS: Toxic to bees; do not spray directly or allow to drift onto blooming crops or weeds where bees are foraging. | |||||
| BLOOM | |||||
| A. | SPINOSAD | ||||
| (Entrust)# | 1.25–2.5 oz | 0.42–0.83 oz | 4 | 1 | |
| (Success) | 4–8 fl oz | 1.3–2.7 fl oz | 4 | 1 | |
| MODE-OF-ACTION GROUP NUMBER1: 5 | |||||
| COMMENTS: Most effective when applied at petal fall. This product is toxic to bees for 3 hours following treatment; apply in the late evening after bees have stopped foraging. Do not apply more than 29 oz/acre per year of Success or 9 oz/acre per year of Entrust. | |||||
| B. | CHLORANTRANILIPROLE | ||||
| (Altacor eVo) | 1.5–2.2 oz | 4 | 10 | ||
| MODE-OF-ACTION GROUP NUMBER1: 28 | |||||
| COMMENTS: For best results, apply in 100 to 150 gal water/acre. | |||||
| C. | METHOXYFENOZIDE | ||||
| (Intrepid 2F) | 8–16 oz | 4 | 7 | ||
| MODE-OF-ACTION GROUPNUMBER1: 18 | |||||
| COMMENTS: Apply at petal fall. Do not apply more than 16 fl oz/acre per application or 64 fl oz/acre per season. | |||||
| D. | SPINETORAM | ||||
| (Delegate WG) | 4.5–7 oz | 4 | 1 | ||
| MODE-OF-ACTION GROUP NUMBER1: 5 | |||||
| COMMENTS: Toxic to bees; do not spray directly or allow to drift onto blooming crops or weeds where bees are foraging. | |||||
| E. | BACILLUS THURINGIENSIS ssp. KURSTAKI | ||||
| (Deliver Biological)# | Label rates | 4 | 0 | ||
| MODE OF ACTION GROUP NUMBER1: 11A | |||||
| COMMENTS: Make two applications during bloom: the first between popcorn and the beginning of bloom and the second 7–10 days later, but no later than petal fall. Compatible with fungicide sprays, and can be tank mixed with them. Good coverage is essential. Ground application using a concentrate rate (80–100 gal water maximum) is preferred. If aerial applications must be made because conditions do not permit ground application, a concentrate rate (5 gal or less) is preferred. Fly material on at a height of about 20 ft. over the canopy using appropriate nozzles to allow better deposition on the treetops. Precede this treatment with an oil spray during the delayed-dormant season to control San Jose scale and European red mite eggs. | |||||
| AFTER BLOOM | |||||
| A. | SPINOSAD | ||||
| (Entrust)# | 1.25–2.5 oz | 0.42–0.83 oz | 4 | 1 | |
| (Success) | 4–8 fl oz | 1.3–2.7 fl oz | 4 | 1 | |
| MODE-OF-ACTION GROUP NUMBER1: 5 | |||||
| COMMENTS: Most effective when applied at petal fall. This product is toxic to bees for 3 hours following treatment; apply in the late evening after bees have stopped foraging. Do not apply more than 29 oz/acre per year of Success or 9 oz/acre per year of Entrust. | |||||
| B. | METHOXYFENOZIDE | ||||
| (Intrepid 2F) | 8–16 oz | 4 | 7 | ||
| MODE-OF-ACTION GROUP NUMBER1: 18 | |||||
| COMMENTS: Apply at petal fall. Do not apply more than 16 fl oz/acre per application or 64 fl oz/acre per season. | |||||
| C. | CHLORANTRANILIPROLE | ||||
| (Altacor eVo) | 1.5–2.2 oz | 4 | 10 | ||
| MODE-OF-ACTION GROUP NUMBER1: 28 | |||||
| COMMENTS: For best results, apply in 100 to 150 gal water/acre. | |||||
| D. | SPINETORAM | ||||
| (Delegate WG) | 4.5–7 oz | 4 | 1 | ||
| MODE-OF-ACTION GROUP NUMBER1: 5 | |||||
| COMMENTS: Toxic to bees; do not spray directly or allow to drift onto blooming crops or weeds where bees are foraging. | |||||
| E. | BACILLUS THURINGIENSIS ssp. KURSTAKI | ||||
| (Deliver Biological)# | Label rates | 4 | 0 | ||
| MODE-OF-ACTION GROUP NUMBER1: 11A | |||||
| COMMENTS: Bt is a stomach poison and must be consumed by the leafroller; therefore, it is most effective when applied during warm, dry weather when larvae are actively feeing. Most effective against young larvae. Requires more than one treatment; apply second application 7 to 10 days after first. | |||||
| F. | CARBARYL* | ||||
| (Sevin XLR Plus) | 3–4 qt | 12 | 1 | ||
| MODE-OF-ACTION GROUP NUMBER1: 1A | |||||
| COMMENTS: May cause increased spider mite problems; best used late in the season. Do not apply more than 14 qt/acre per season. Highly toxic to bees; do not spray directly or allow to drift onto blooming crops or weeds where bees are foraging. | |||||
| G. | PHOSMET | ||||
| (Imidan 70-W) | 2 1/8–4 1/4 lb | 7 days | 14 | ||
| MODE-OF-ACTION GROUP NUMBER1: 1B | |||||
| COMMENTS: Highly toxic to bees; do not spray directly or allow to drift onto blooming crops or weeds where bees are foraging. | |||||
| ** | For dilute applications, rate is per 100 gal water to be applied in 300-500 gal water/acre, according to label; for concentrate applications, use 80-100 gal water/acre, or lower if label allows. |
| ‡ | Restricted entry interval (REI) is the number of hours (unless otherwise noted) from treatment until the treated area can be safely entered without protective clothing. Preharvest interval (PHI) is the number of days from treatment to harvest. In some cases the REI exceeds the PHI. The longer of two intervals is the minimum time that must elapse before harvest. |
| * | Permit required from county agricultural commissioner for purchase or use. |
| # | Acceptable for use on organically grown produce. |
| — | Not recommended or not on label. |
| 1 | Rotate chemicals with a different mode-of-action Group number, and do not use products with the same mode-of-action Group number more than twice per season to help prevent the development of resistance. For example, the organophosphates have a Group number of 1B; chemicals with a 1B Group number should be alternated with chemicals that have a Group number other than 1B. Mode of action Group numbers are assigned by IRAC (Insecticide Resistance Action Committee). For additional information, see their Web site at http://www.irac-online.org/. |