Cultural Tips for Growing Chard
In This Guide
Site selection
Plant your garden in a convenient location, where you can check it frequently. Choose an area near an abundant supply of water so you can water as needed easily. Vegetables do best if they receive full sunlight (at least 4 to 6 hours a day). Plant them in a well-exposed area in the garden, where they are not shaded by trees, fences, or walls. Try to plant away from areas that will be watered by lawn sprinklers.
Whenever possible, select a location that is not heavily infested with weeds, especially weeds such as field bindweed, nutsedge, and Bermudagrass that can be hard to control with hand weeding. Also avoid areas that have had previous disease problems.
Try to plant on level ground. Level ground is easier to work on than sloping ground. Vegetables will do well on a wide range of soils; they do best in well-drained soils. If your soil forms a clump when squeezed, then it is too wet; if the soil crumbles easily, it is a good soil to use. Damp soil surfaces encourage snails, slugs, sowbugs, and root diseases; fruit decay and leaf spot diseases may also increase. Soil amendments can make clay and sandy soils easier to work with, and correct soil preparation can improve poor soil.
Adding organic matter (compost, peat moss, manure, sawdust, ground bark) makes clay and sandy soils easier to work with. The soil should be kept at a pH level of 6.0 to 6.5. Lime or gypsum can be added to soils low in calcium.
Soil recommendation
Deep, well-drained soils such as sandy loam, silt loam or muck. High levels of organic matter in soil are desirable.
Soil improvement
Any type of soil can be improved with soil amendments. Heavy clay or sandy soils can be improved by adding organic material such as compost, manure, or leaf mold. Texture is an important consideration when choosing an amendment. An amendment that is granular and fine grained is important for container mixes. For gardens, a more coarse-grained amendment can improve drainage and aeration. Work amendments into soil by rototilling, raking, or double-digging.
Soil preparation
The preparation of your soil is just as important as adding fertilizer and soil amendments. Before working the soil, make sure it is moist but not thoroughly wet.
- Use a shovel, rototiller, metal bow rake, or all of them together to loosen the top 1 to 2 inches of soil. Rake the area to remove weeds and old crop debris. Be sure to dig out roots.
- Irrigate the plot deeply to encourage the germination of weed seeds.
- In a week or two, after a substantial number of weeds have germinated, work the area again to kill the weed seedlings. Be sure to break up the clods in the soil, as seeds planted in cloddy soil will germinate poorly and won't live long because the soil dries too quickly.
- Form soil into beds if desired, and plant while soil is still wet.
Time to plant
Chard is a cool-season crop that grows best when air temperatures are between 50°F and 64°F. It will grow well in cool and warm weather in some regions and can be planted in early spring and late summer. Minimum soil temperature for seed germination is 41°F. Optimal temperatures for germination are 50°F to 86°F. The maximum temperature for germination is 95°F. Chard will tolerate frost and mild freezes.
Planting Dates for Chard in California* |
North and North Coast
Monterey County north |
February – May
August |
South Coast
San Luis Obispo County south |
February – May |
Interior Valleys
Sacramento, San Joaquin valleys |
February
August |
Desert Valleys
Imperial and Coachella valleys |
September – October |
*Planting dates are only approximate as the climate may vary greatly within the regions denoted. Contact your local UC Master Gardener program and experiment on your own to find more precise dates. |
Planting Chard
Chard can be direct seeded or transplanted. When direct seeding, thin plants until they are 6 to 10 inches apart. Thinnings can be eaten or composted. If transplanting, plant starts 6 to 10 inches apart. Rotate crops to avoid damping-off and root rot diseases.
Fertilizing
Most vegetables require fertilizer for growth. Organic materials, such as manures and compost, and inorganic materials, such as chemicals, can be used to fertilize plants. Using both types of materials usually provides the best growth. Manures and compost can be used to increase soil fertility. They are usually applied at 1 pound per 4 or 5 square feet. These materials should be worked into the soil several weeks before planting in order to allow it to decompose. Manure that contains straw, sawdust, or similar materials should be applied with a commercial nitrogen fertilizer. Generally, if the soil has been properly amended with compost or manures or other organic materials, the only nutrient needed is nitrogen, if anything. Some commercial nitrogen fertilizers available are urea, ammonium sulfate, calcium nitrate, and ammonium nitrate. Apply these fertilizers at rates of 0.5 to 1 pound of nitrogen per 100 feet of row.
If manure and other organic material has not been used, apply fertilizer that contains both nitrogen and phosphorus before planting. All commercial fertilizers are labeled by the percentages of N-P-K; nitrogen (N), phosphorus (P), and potassium (K). Some common mixed fertilizers are 5-10-5, 5-10-10, 8-16-16, and 12-12-12. Apply these fertilizers at rates of 1 - 2 pounds per 100 feet of row. After plants are 3 to 4 inches tall, sidedress nitrogen in narrow bands or furrows and water thoroughly after application or apply through the drip system. Consider light but frequent applications of nitrogen fertilizer every 3 to 4 weeks. Avoid letting the fertilizer come into contact with the plant stems to avoid burning.
Application tips
Inorganic fertilizers can be sidedressed. Manures are more difficult to use as a side dressing and must be tilled into the soil.
Banding: Make a small groove 1 or 2 inches deep on both shoulders of the bed, 4 to 6 inches from the plant row and band in the fertilizer. Replace the soil and irrigate.
Broadcasting: Fertilizers can be scattered along the bed shoulders. Work into the soil soon after. This is less efficient than the banding method but will be more practical when the plants are so large that the bed shoulders are inaccessible for banding.
Where sprinklers are used, fertilizer may be scattered on the soil surface between rows before irrigating. Where drip or trickle tubes are used, apply fertilizer on the soil surface near the drip tube.
Watering Chard
Chard can be grown under drip, sprinkler, or furrow irrigation. Examine your soil visually and with your hands to determine the need for additional water. Water deeply by drip, furrow, or overhead irrigation to encourage deep rooting. Avoid wetting foliage with overhead watering. If you allow water to seep through only to the top few inches of your soil, root growth will be stunted. Keep adequate moisture in the deeper soil layers even when plants are small. Deep moisture is harder to replace later in the growing season without over irrigating.
Harvesting and Storing Chard
Chard is ready to harvest in 50 to 60 days. Harvest by cutting or breaking off outer, fully expanded leaves. After harvesting, chard can be stored in the refrigerator for 10 to 14 days. Store in cold, moist conditions.
Storage tips
Chard should not be stored with ethylene-producing fruits or vegetables.
|
Chard plants.
Seed bed preparation.
Amending soil to prepare for planting.
Bag of fertilizer.
|